Highland Homes Inc. via Houzz
When we first moved into our house there was no step up to our porch and I noticed quickly that the distance was too large especially younger children and older adults.
So, I created a little make shift step out of concrete 8″x12″ slabs stacked on top of each other and called it good for a few years (pictured below).
However as time has passed a slab or two cracked and I was ready for a more permanent solution. I of course researched making my own brick step and although I was intimidated by the idea it looked do-able so I did it!
HERE’S THE RESULT:
Note: The black stuff in the before photo is not mold, it is dirt and debris from the concrete slabs that laid there for years.
AFTER
Because the concrete around the porch was already stamped into brick shapes I decided to paint the concrete a brick color.
I really like how it turned out but since brick has natural variations of color I plan to add more paint colors for a more natural look.
So want to learn how to build a brick step? Great!
SUPPLIES
-Quikrete Mortar Mix
-Rubber Gloves
-Water
-A Large piece of Plywood
-Trowel
-Tape Measurer
-Level
-Brick Jointer
-Brush
-Bricks (For the first 2 levels of brick I used free bricks that I got from my neighbor…they were sitting in her garage when she moved in and she was happy to get rid of them. The top level are brick pavers I purchased from Home Depot for .52 cents each).
DIRECTIONS:
- Do the planning. Measure out how large you want the step to be and arrange them.
This way as you are laying them down with mortar it is easy to grab the one you need and know where to put it.
Here are some brick pattern ideas if you need them.
Source: Purestform.tumblr
2. Get the Mortar Ready.
3. With the trowel put the mortar on the bottom and side of the brick and lay the brick firmly in place.
Tip- HERE is a video showing how to properly “butter” a brick I didn’t quite master this technique but I got the job done.:-)
Also, as you go consistently use your level to make sure the bricks are being installed level.
4. Complete your first row.
5. Complete your second row.
6. Add your last layer of bricks.
7. Finishing Touches. Once the mortar starts to dry a little bit push the jointer along the grout lines to create a smooth, uniform divot.
Then with the brush thoroughly brush the steps clearing away any mortar debris. Once the mortar is completely dry (I waited 24 hours) use a hose to spray down the step.
I’m so glad I faced my fears and tackled this project! I now have an attractive, durable step to my porch and only cost $50 to make Since this was my first brick project it did take me about 6 hours to complete but I’m still really glad I did it!
I hope this post helps you (if not now then maybe down the line)! As always thanks for being here!!